29

Operation precautions of conveyor

2018/1/19

  (1) After the conveyor moves to the working area, pay attention to fix the moving wheels with special wooden blocks (triangular wedge) or bricks and stones to prevent the conveyor from moving or moving during operation;
  (2) Belt conveyor requires no-load start to reduce starting resistance. The whole conveyor can run under heavy load only after 5 minutes of no-load operation;
  (3) Generally, the belt conveyor shall not be started with full load. If it is necessary to start with full load under special circumstances, some materials on the conveyor belt shall be removed first, and then the machine shall be started by inching;
  (4) Generally, the belt conveyor shall not be started with full load. If it is necessary to start with full load under special circumstances, some materials on the conveyor belt shall be removed first, and then the machine shall be started by inching;
  (5) Ordinary rubber conveyor belt is strictly forbidden to contact with gasoline, diesel oil, engine oil and other grease or organic solvents, so as to avoid corrosion deformation of the conveyor belt and affect its normal use. The conveyor belt should be inspected frequently to remove the grain or debris adhered on the surface of the conveyor belt in time;
  (6) It is necessary to prevent the guide baffle of the feeding hopper from contacting with the surface of the conveyor belt, resulting in wear of the conveyor belt surface. The feeding of the conveyor should be even and aligned with the conveyor belt to prevent the deviation of the conveyor belt caused by unbalanced load.
  (7) After stopping feeding, the grain on the loading section must be unloaded before parking.

(8) After the telescopic belt conveyor stops, the telescopic part should be adjusted to the shortest length.

(9) When the conveying equipment is placed in the open air, the operator shall do a good job in waterproof, rainproof and moisture-proof work for the motor and distribution box of the equipment. Or cover the rain cover cloth specially used for machinery.